a-way Consulting AB jobb i Göteborg

No obstacle is to big, no detail is to small.

An open communication climate and short decision paths describes our organization very well. We are a close-knitted company where all opinions are both valued and heard.

The consultants at a-way are committed to their work, driven, experienced, well-educated and passionate about technology and development. If there is a will – there is a-way.

The team is our main focus and most important company asset. We invest a lot of resources to provide them with the best possible opportunities to progress in direction they wish. We have assignments all across Sweden, the rest of Europe, Asia and South America.
Knowledge within follow programs;
Catia V5, Creo, Autocad
PLM Systems: Teamcenter, Delmia, Windchill
5S, FMEA, Green Belt, APQP, PPAP
a-way is searching for a resource with experience from CAD design within the automotive industry. Will work towards world-leading companies in manufacturing industry.

No obstacle is to big, no detail is to small.

An open communication climate and short decision paths describes our organization very well. We are a close-knitted company where all opinions are both valued and heard.

The consultants at a-way are committed to their work, driven, experienced, well-educated and passionate about technology and development. If there is a will – there is a-way.

The team is our main focus and most important company asset. We invest a lot of resources to provide them with the best possible opportunities to progress in direction they wish. We have assignments all across Sweden, the rest of Europe, Asia and South America.
Knowledge within follow programs;
Catia V5, Creo, Autocad
PLM Systems: Teamcenter, Delmia, Windchill
5S, FMEA, Green Belt, APQP, PPAP
a-way is searching for a resource with experience from CAD design within the automotive industry. Will work towards world-leading companies in manufacturing industry.

No obstacle is to big, no detail is to small.
An open communication climate and short decision paths describes our organization very well. We are a close-knitted company where all opinions are both valued and heard.
The consultants at a-way are committed to their work, driven, experienced, well-educated and passionate about technology and development. If there is a will – there is a-way.
Qualifications:
Are you about to graduate and want to kick off your career, do you want to work with C++ and Python, do you want to continue to develop yourself in the automotive industry?
We are looking for outstanding individuals with some of the following competences:
Creative, ambitious & inspiring personality
Find it easy to work with other people and being passionate in what you do
M.Sc. in software engineering or equivalent
Comfortable with development in a Linux environment
Agile software development
Programming languages: C++, Python
Tools: Jenkins, Git
Own hobby projects, involvement in OpenSource projects and the like within software development are merit.
Mandatory to be resident in Sweden

För kunds räkning söker vi ett antal erfarna CNC operatörer för främst fräsning och svarvning av allt från fixturer och enklare små detaljer, till stora och komplexa svetsade detaljer. Bearbetning sker i moderna fleroperationsmaskiner eller svarvar.
Personen vi söker måste vara självgående och med stort leveransfokus och förmåga att bli klar i tid inom givna ramar. Ett självklart krav är att du har kunskap inom 2D och 3D ritningsläsning, toleranser form och läge.
Kontaktytor är inom kunds industrialiseringsavdelning, teknik och produktion.


Lön: Enligt kollektivavtal och diskussion
Medborgarskap: Tjänsten kräver svenskt medborgarskap
Språk: Tjänsten kräver att man full ut behärskar svenska språket
Övrigt: Tjänsten kräver att man måste genomgå och klara en säkerhetsklassning
Uppdragsort: Karlskrona

No obstacle is to big, no detail is to small.

An open communication climate and short decision paths describes our organization very well. We are a close-knitted company where all opinions are both valued and heard.

The consultants at a-way are committed to their work, driven, experienced, well-educated and passionate about technology and development. If there is a will – there is a-way.

The team is our main focus and most important company asset. We invest a lot of resources to provide them with the best possible opportunities to progress in direction they wish. We have assignments all across Sweden, the rest of Europe, Asia and South America.
Knowledge within follow programs;
Catia V5, Creo, Autocad
PLM Systems: Teamcenter, Delmia, Windchill
5S, FMEA, Green Belt, APQP, PPAP
a-way is searching for a resource with experience from CAD design within the automotive industry. Will work towards world-leading companies in manufacturing industry.

Do you want to be part of a successful and well-balanced simulation team that love simulations and technology development? Do you want to be involved in and affect both your own work situation and the activity in which you work?
As a CAE Aerodynamics & Thermal Management engineer at A-Way Consulting, there are several possibilities for you depending on your interests and wishes. Here you can further develop within your specialist area or broaden yourself in new areas.
Competence:
You have worked for a few years with Aerodynamics simulations & testing. You have experience ANSA Siemens Simcenter Star-ccm+, or other similar tools. You are used to interpreting calculation results, presenting conclusions and having a deep engineering understanding.
Personality and commitment:
Personal qualities that we value are your ability to act independently. You are positive and possess a drive with the ability to create and maintain good relationships with our customers. You are stimulated by problem solving and using your creativity to find new solutions. Of course, you have a genuine technological interest! You consider your salary to be in relation to your competence and further we share responsibility with you to maintain and develop your competitive consultancy profile. Great emphasis will be on personal suitability.
Main responsibilities
· Perform analysis and assessment of results for aerodynamics of given designs
· Perform method development work in the aerodynamics area, modeling and testing
· Develop design proposals alternatives working with creative design
· Participating in applicable program activities
· Develop strategies to optimize aerodynamics


Required qualifications
· M.Sc. or Ph.D. within engineering physics, chemistry, applied mechanics, or a similar education
· Experience from simulation and verification
· Experience with aerodynamic analyses required
· Driver license B
· Experience in automotive industry
· High skills in CAE tools like ANSA and Star-ccm+
· Good skills in Siemens Team center, CATIA, NX
· Fluent in English, written and spoken
· Experience from wind tunnel test
· Experience of project work and professional communication skills including presentations
· Availability to travel– cultural awareness.
· Agile mindset and way of working

CAE Engineers Durability, Structure Body, Closures, Components & Chassis structures!
Do you want to be part of a successful and well-balanced simulation team that love simulations and technology development? Do you want to be involved in and affect both your own work situation and the activity in which you work?
As a CAE Structure Body, Closures, Components & Chassis structure engineer at A-Way Consulting, there are several possibilities for you depending on your interests and wishes. Here you can further develop within your specialist area or broaden yourself in new areas.
Competence:
You have worked for a few years with body, chassis and closures. You have experience in Beta and Hyperworks or other similar tools. You are used to interpreting calculation results, presenting conclusions and having a deep engineering understanding.
Personality and commitment:
Personal qualities that we value are your ability to act independently. You are positive and possess a drive with the ability to create and maintain good relationships with our customers. You are stimulated by problem solving and using your creativity to find new solutions. Of course, you have a genuine technological interest! You consider your salary to be in relation to your competence and further we share responsibility with you to maintain and develop your competitive consultancy profile. Great emphasis will be on personal suitability.
Main responsibilities
In this position you will work with FE structural analysis of vehicle bodies, closures and components. You will work cross-functional in the organization to define the performance of the components and systems. You will also be an important part of defining the future vehicle bodies, closures and components to ensure fulfillment of strength and durability/fatigue requirements.
Required qualifications
· M.Sc. or Ph.D. within engineering physics, chemistry, applied mechanics, or a similar education
· Experience from simulation and verification
· Experience in automotive industry
· Fluent in English, written and spoken
· Agile mindset and way of working
· Experience in developing strength and durability of vehicle bodies, closures and components by combining linear/non-linear static, fatigue, dynamic structural and optimization simulations
· Experience within structural strength, durability/fatigue, FE analysis and optimization of chassis parts and systems
· Proficiency in HyperWorks, BETA, OptiStruct, Nastran, nCode designlife, Python, Matlab
· Good skills in Siemens Simcenter 3D, Teamcenter and NX
· Experience of project work and professional communication skills including presentations
· Availability to travel – cultural awareness
· Experience from other OEMs in CAE body & closures area

No obstacle is to big, no detail is to small.


An open communication climate and short decision paths describes our organization very well. We are a close-knitted company where all opinions are both valued and heard.


The consultants at a-way are committed to their work, driven, experienced, well-educated and passionate about technology and development. If there is a will – there is a-way.

Description

We are looking for an experienced Group Design Leader (KU) with good knowledge in project management. Adding knowledge and experience to the existing team’s performance by being self-motivated and self-driven with a passion for getting results and takes pride in the delivery.

Role description


We have the development responsibility for the customers all product families and the development work is done in close cooperation with our suppliers. Development activities are carried out mainly in Gothenburg.

You will work in a creative environment where tomorrow's cars are shaped. We work in Agile cross-functional teams tailored to development tasks.

In the team, we are working together, caring and helping each other. We have a wide interface that provides both an extensive contact network as well as knowledge in the many varied property areas.

Main responsibilities
• Group Design Leaders (KU)
• Be part of an Agile team delivering to several projects
• Secure project deliverables according to project timing plan with cross functional team work incl supplier cooperation

Required qualifications
• Minimum B.Sc. grade within mechanics or a similar education
• Project Management skills
• Fluent in English (written and spoken)
• Preferably (but not required) knowledge of sheet metal design
• Preferred knowledge of VCC systems such as KDP
• Preferably (but not required) good knowledge in Tce and Catia V5

Personal qualities
• Willing to learn and show interest for new challenges
• You find it exiting to work in a development environment with a high rate of change and complex problems to solve
• Great social skills
• Proactive and drives issues to solution

a-way är konsultbyrån som ifrågasätter standardlösningar och söker svar på framtidens frågor. Vi levererar lösningar som överträffar det förväntade. För oss är inget hinder för stort, ingen detalj för liten. Genom att med öppenhet se på behovet och vända på rätt stenar kan våra konsulter utveckla bättre lösningar för morgondagens utmaningar. Vårt mål är att stärka kundens verksamhet, vi ger oss inte förrän vi har hittat a-way. Requirements:
Thorough knowledge of dimensional engineering and body manufacturing process’s as, the effect on dimensional from final assembly process.
Ability to read product drawings, GD&T drawings and Tool Design drawings
Good PC knowledge including CATIA, RD&T and Teamcenter
Software and IT:
Team center RDnT, CM4D Catia MP drawing skills
Personal attributes:
Demonstrated organizational skills and ability to work independently.
Demonstrated high levels of interpersonal skills to work effectively with others, motivate others, and raise work output and results.
Demonstrated organizational skills and ability to work independently.




a-way Consulting AB are looking for a Manufacturing Geometry Engineer with assignment at one of our clients in Gothenburg.

Assignment Description:
Contribute to the geometry assurance work through creation of, reviewing of and approval of measurement drawings for single parts, delivery units, in-house subassemblies, subsystems and for complete vehicle.
Review geometry systems and judge the possibility to measure based on tool set-up and environment.
Drive discussions with geometry assurance engineers, dimensional management and perceived quality regarding measurement sections and give feedback on possible ways of verifying stated final demands.
Participate in planning activities and provide weekly status reports.
Make the RPS and Tolerancing for single parts and in-house assembly’s.
Give input to the Tolerancing from a Manufacturing point of view and approve the requirements from ME side.
Participate in engineering meetings.
Support the Matching process, give input to resolutions and keep track on all related issues.

Do you want to be part of a successful and well-balanced simulation team that love simulations and technology development? Do you want to be involved in and affect both your own work situation and the activity in which you work?
As an engineer at A-Way Consulting, there are several possibilities for you depending on your interests and wishes. Here you can further develop within your specialist area or broaden yourself in new areas.
The Energy attribute leader shall:

• Lead Attribute work within Aerodynamics, Thermodynamics, Contamination and Fuel Economy for specified projects.
• Communicate targets and request agreements from PSS areas
• Continuously follow up and collect design status for each design area
• Continuously summarize attribute status and report within the team and to the project.
• Help PSS areas to find potentials to improve the Energy Balance performance.
• Support design areas with guidance of design proposals, development of specifications, concept selections, supplier evaluations.
• Report status to Unit Project Leader (UPL) for respective project.
• Report Energy status at Project meetings, Design reviews and Attribute performance reviews.
• Support in planning of scheduled tests for Aero, Thermo, Contamination and Fuel Economy.
• Support preparation of test vehicles required for the verification of the attribute performance.
• Support execution of planned physical tests.
• Summarize, evaluate and analyze test results.
• Communicate test results to Unit Project Leader (UPL) and Project.
• Report status at Unit Project meetings, Project meetings, Design Verification Reviews and Attribute reviews.

Requirements:
• Master of Science (M.Sc) within electrical engineering or similar experience from assignments within the working life.
• Detailed knowledge in automotive design
• Experience from analysis of Aero, Thermo, Contamination and Fuel Economy within the automotive industry.
• Experience from theoretical virtual and physical test execution of Aero, Thermo, Contamination and Fuel Economy in vehicles.
• Knowledge of requirement setting for Energy areas mentioned above.
• Ability to act on non-physical input only, such as calculations and CAE results.
• Ability to interpret, understand and act on test data.
• Preferable experience from working within VCC organization.
• Experience from working in Team Center.
• Experience from working within System Weaver.
• Fluent in English both written and spoken. Knowledge in Swedish is favorable.
• Good understanding of customer needs.

Software and IT:
• You are a skilled user in Microsoft Office
• You are familiar with Team Center Viewer
• You are familiar with System Weaver



Personal attributes

• Easy to cooperate with team members of different cultural background.
• Ability to define tasks needed to solve the requested performance for the attribute.
• Ability to form teams with the correct composition to make them conduct the defined tasks.
• Ability to follow up and make sure that agreed plans are executed.
• Ability to analyze and present results.
• Thorough and eager to come to solutions with the best possible result for the attribute and the vehicle as a whole.
• You are flexible and structured, can work independently as well as in teams.
• You have a strong drive and engagement.
• You are self-going and self-learning.
• You have a genuine interest in automotive and can combine practical and theoretical knowledge.
• You are willing to help others and to ask for help when needed.



a-way är konsultbyrån som ifrågasätter standardlösningar och söker svar på framtidens frågor. Vi levererar lösningar som överträffar det förväntade. För oss är inget hinder för stort, ingen detalj för liten. Genom att med öppenhet se på behovet och vända på rätt stenar kan våra konsulter utveckla bättre lösningar för morgondagens utmaningar. Vårt mål är att stärka kundens verksamhet, vi ger oss inte förrän vi har hittat a-way.

Do you want to be part of a successful and well-balanced simulation team that love simulations and technology development? Do you want to be involved in and affect both your own work situation and the activity in which you work?
As a CAE NVH engineer at A-Way Consulting, there are several possibilities for you depending on your interests and wishes. Here you can further develop within your specialist area or broaden yourself in new areas.

Required qualifications
• M.Sc. or Ph.D. within engineering physics, chemistry, applied mechanics, or a similar education
• Experience from simulation and verification
• Experience in NVH simulations in mechanical components and structures
• Experience in transmission development is highly appreciated
• Availability to travel to China – cultural awareness Asia – European culture
• Experience in automotive industry
• Good understanding of transmission development process
• Experience of project work and professional communication skills including presentations
• Fluent in English, written and spoken
• Good skills in ABAQUS, SMT MASTA and GT-Suite is beneficial





Competence:
You have worked for a few years with NVH simulations on various industrial applications, such as transmission and powertrain. You have experience with Abaqus, SMT MASTA and GT-Suite, or other similar tools. You are used to interpreting calculation results, presenting conclusions and having a deep engineering understanding.
Personality and commitment:
Personal qualities that we value are your ability to act independently. You are positive and possess a drive with the ability to create and maintain good relationships with our customers. You are stimulated by problem solving and using your creativity to find new solutions. Of course, you have a genuine technological interest! You consider your salary to be in relation to your competence and further we share responsibility with you to maintain and develop your competitive consultancy profile. Great emphasis will be on personal suitability.
The current assignment is at one of our customers at Lindholmen, at the transmission department.
Main responsibilities
• Perform acoustic analysis of transmission housing surface vibration
• Perform structural dynamic analyses of powertrain and transmission components
• Perform transmission dynamics analysis of gear excited noise
• Perform torsional dynamic analysis of components in the transmission
• Through simulations: Identify & Explain mechanics/physics behind different NVH phenomena in the transmission
• Provide advice on potential design improvements to avoid/mitigate NVH issues
• Advice on the development/creation of simulation methodologies for NVH
• Advice on NVH measurements both in rig and in vehicle for correlation purposes


a-way är konsultbyrån som ifrågasätter standardlösningar och söker svar på framtidens frågor. Vi levererar lösningar som överträffar det förväntade. För oss är inget hinder för stort, ingen detalj för liten. Genom att med öppenhet se på behovet och vända på rätt stenar kan våra konsulter utveckla bättre lösningar för morgondagens utmaningar. Vårt mål är att stärka kundens verksamhet, vi ger oss inte förrän vi har hittat a-way.

Do you want to be part of a successful and well-balanced simulation team that love simulations and technology development? Do you want to be involved in and affect both your own work situation and the activity in which you work?
As a simulation engineer at A-Way Consulting, there are several possibilities for you depending on your interests and wishes. Here you can further develop within your specialist area or broaden yourself in new areas.
Competence:
You have worked for a few years with SIL virtual development within automotive or other applications.

Required qualifications
• M.Sc, in Computer Science, Applied Physics, Mechatronic Engineering or equivalent
• Fluent in English, written and spoken
• Experience of physical modelling
• Experience of development of simulation environments
• Experience of simulation in SIL environments is meritorious
• Experience of software project is meritorious

Personal qualities
• Team-oriented, cooperative and good networking skills
• Self-sufficient, driven and engaged
• Thorough, methodical and structured
• Trouble-shooter, target oriented and long-term committed


Competence:
You have worked for a few years with SIL virtual development within automotive or other applications.

Personality and commitment:
Personal qualities that we value are your ability to act independently. You are positive and possess a drive with the ability to create and maintain good relationships with our customers. You are stimulated by problem solving and using your creativity to find new solutions. Of course, you have a genuine technological interest! You consider your salary to be in relation to your competence and further we share responsibility with you to maintain and develop your competitive consultancy profile. Great emphasis will be on personal suitability.
This assignment is at one of our big automotive customers in Gothenburg, at the group Virtual Test Environments that creates simulators for virtual testing and calibration as a complement to physical vehicle testing.

As a SIL Developer you will be part of a team working with the development of one of Volvos simulation environments. You will develop Volvos Software In the Loop (SIL) environment used for testing and calibration of the engine control software, as well as in the continuous integration tool chain. You will work with other simulation and model developers, in a tightly knit Scrum team.


a-way är konsultbyrån som ifrågasätter standardlösningar och söker svar på framtidens frågor. Vi levererar lösningar som överträffar det förväntade. För oss är inget hinder för stort, ingen detalj för liten. Genom att med öppenhet se på behovet och vända på rätt stenar kan våra konsulter utveckla bättre lösningar för morgondagens utmaningar. Vårt mål är att stärka kundens verksamhet, vi ger oss inte förrän vi har hittat a-way.

Dags att starta om ditt liv såhär efter nyår med alla dess löften. Här har du chansen att komma till ett expansivt företag som sätter konsulterna i främsta rummet. Ni är vår största tillgång. Kom och bli en del av gänget och utveckla kunderna, vårt företag och inte minst dig själv!
Med erfarenhet från fordon och industri tillverkning, a-way söker personer med Bakgrund som produktionstekniker eller berednings erfarenhet. erfarenhet från något av följande områden: BiW, Geometri, Automation, Fixtures, Projektledning, Svetsning, Buy-of, Autoform.


Du har troligen kunskaper inom ett eller allra helst flera av dessa områden: Catia V5, Teamcenter, 5S, FMEA, Green Belt, APQP, PPAP

a-way är konsultbyrån som ifrågasätter standardlösningar och söker svar på framtidens frågor. Vi levererar lösningar som överträffar det förväntade. För oss är inget hinder för stort, ingen detalj för liten. Genom att med öppenhet se på behovet och vända på rätt stenar kan våra konsulter utveckla bättre lösningar för morgondagens utmaningar. Vårt mål är att stärka kundens verksamhet, vi ger oss inte förrän vi har hittat a-way.