Göteborg: Electrical Engineer in Automotive Industry

About the Role
We are looking for an experienced HIL Development Engineer with strong hands-on expertise in Hardware-in-the-Loop (HIL) architecture, development, modelling, integration, and system-level debugging.
This role is focused on developing and maintaining advanced HIL environments used for vehicle system validation. We are looking for engineers who have experience building and improving HIL test systems – not only executing tests. The ideal candidate has a strong background in real-time simulation, ECU integration, automotive communication, and troubleshooting complex embedded systems.
You will work closely with development, verification, and integration teams to secure robust test environments and support the validation of future vehicle technologies.


Key Responsibilities
HIL Development & Integration (Mandatory)
Design, develop, commission, and maintain HIL test rigs and environments.
Integrate ECUs, I/O systems, communication interfaces, sensors, and actuators into HIL platforms.
Configure and set up HIL systems using platforms such as:
dSPACE
Vector
ETAS
National Instruments (NI)
Speedgoat
Develop real-time test environments for vehicle subsystems and complete vehicle validation.
Define and optimize HIL architecture, signal flow, and interface management.
Support continuous improvement of HIL setups and validation processes.



HIL Modelling & Real-Time Simulation
Develop MATLAB/Simulink models for:
Vehicle systems
Plant models
Environment simulation
Control systems
Optimize models for real-time execution and HIL deployment.
Perform model validation, calibration, and debugging in real-time environments.
Work with simulation tools such as:
ASM
CarMaker
VTD
PreScan
Similar simulation platforms

Experience within vehicle dynamics modelling is highly beneficial, including understanding of:
Longitudinal dynamics
Lateral dynamics
Powertrain behavior



Automotive Communication & Diagnostics
Develop, configure, and troubleshoot automotive communication networks.
Work hands-on with:
CAN
CAN FD
LIN
FlexRay
Automotive Ethernet
Configure and debug communication databases and network setups.
Use tools such as:
CANoe
CANalyzer
ControlDesk
INCA
Similar diagnostic tools
Perform root-cause analysis of ECU, communication, and system-level issues.



HIL Operations, Maintenance & Troubleshooting
Operate and monitor HIL benches on a daily basis.
Manage software flashing, configuration management, and release deployment.
Troubleshoot:
Hardware issues
Software issues
Simulation model problems
Communication-related failures
Monitor test environment stability and resolve technical issues.
Collaborate with development, validation, and integration teams to ensure system readiness.



ADAS & Sensor Knowledge (Meritorious)
Experience or knowledge within ADAS systems is considered an advantage.
Examples of relevant areas:
Adaptive Cruise Control (ACC)
Autonomous Emergency Braking (AEB)
Lane Keeping Assist (LKA)
Traffic Sign Recognition (TSR)
Blind Spot Detection (BSD)
Pilot Assist functions

Knowledge of sensor technologies is beneficial:
Radar
Camera systems
LiDAR
Ultrasonic sensors
GNSS
IMU

Experience with ADAS scenario generation and sensor simulation is highly valued.


System-Level Debugging & Technical Leadership
Perform end-to-end debugging across:
ECUs
Communication networks
Simulation models
HIL environments
Support definition and improvement of HIL architectures and validation strategies.
Drive technical discussions with engineering teams and stakeholders.
Mentor colleagues and contribute with technical guidance.
Take ownership of complex technical challenges and drive solutions forward.



Required Qualifications
Bachelor’s or Master’s degree in Electrical Engineering, Embedded Systems, Mechatronics, Computer Science, or equivalent.
Several years of hands-on experience in automotive HIL development and integration.
Strong experience building and developing HIL environments.
Proven experience with MATLAB/Simulink modelling and real-time simulation.
Experience integrating ECUs and communication networks in HIL environments.
Strong understanding of automotive embedded systems and vehicle validation.
Experience with automotive communication protocols and diagnostics.
Experience with HIL platforms such as dSPACE, Vector, ETAS, NI, or Speedgoat.
Strong debugging and problem-solving skills.
Ability to work independently and drive technical activities.



Preferred Skills
Experience within ADAS systems and sensor technologies.
Experience with test automation and CI/CD environments.
Knowledge of vehicle dynamics modelling.
Experience from large automotive development projects.



Personal Profile
We are looking for someone who is:
A hands-on engineer with strong technical ownership.
Experienced in solving complex system-level problems.
Analytical, structured, and quality-focused.
Comfortable working cross-functionally with different engineering teams.
Able to take initiative and drive technical improvements.
Passionate about embedded systems, simulation, and future vehicle technologies.



Location: Gothenburg, Sweden
Start date: As agreed
Swedish Driving license B is a plus

Vill du arbeta i en bred och internationell roll nära en tekniskt komplex produktion? Vi söker nu en komponentingenjör som vill ta ett helhetsansvar för elektronikens kvalitet och livscykel i en verksamhet med mycket höga krav.
Om tjänsten
Vår kund är en ledande aktör inom avancerad teknik som tillverkar system för miljöer där tillförlitlighet och precision är avgörande. Här blir du en del av en global organisation där produktionen sker både i Göteborg och på andra siter runt om i Europa. Verksamheten präglas av långsiktighet, LEAN-metodik och en vilja att ligga i framkant när det gäller ny produktionsteknologi.
Som komponentingenjör har du en nyckelroll i att säkra att varje enskild komponent lever upp till de högsta standarderna. Du arbetar i gränssnittet mellan utveckling, inköp och produktion, vilket ger dig ett brett kontaktnät både internt och externt. Din vardag handlar om att navigera mellan tekniska detaljer, internationella myndighetskrav och praktisk problemlösning i produktionen. Det är en roll för dig som trivs med tekniskt djup men som också vill ha förståelse för hela försörjningskedjan.
Du erbjuds
Detta bolag erbjuder en spännande roll i en teknikdriven miljö med goda utvecklingsmöjligheter och en kultur som uppmuntrar till lärande och samarbete.
Arbetsuppgifter
Ansvara för att granska och handplocka elektronikdelar där du väger samman teknisk kapacitet med budgetramar och långsiktig hållbarhet
Bryta ner och omsätta komplexa regelverk från globala organ till praktiska riktlinjer för våra skräddarsydda tekniska lösningar
Fungera som teknisk expert vid störningar i produktionslinjen genom att granska mätdata och fastställa grundorsaken till kvalitetsavvikelser
Använda beräkningsmodeller för att förutse komponenternas beteende över tid och samverka med externa partners för att garantera en oavbruten materialtillgång
Medverka vid införandet av nästa generations tillverkningsmetoder för att optimera hanteringen av avancerad elektronik

Vi söker dig som
Har en Civilingenjörsexamen inom elektroteknik, mekatronik, teknisk fysik eller motsvarande
Har en god grundkunskap i hur olika elektronikkomponenter presterar i skarpa miljöer, gärna i en roll nära produktionen
Är bekant med hur logistik- och materialkedjor fungerar och känner dig trygg med att använda stora affärssystem som arbetsverktyg (vi ser det som ett stort plus om du har erfarenhet av SAP)
Är obehindrad i både svenska och engelska, såväl tal som skrift, då båda språken används i det dagliga arbetet
Tjänsten kräver inplacering i säkerhetsklass där svenskt medborgarskap är ett krav

För att lyckas i rollen har du följande personliga egenskaper:
Optimistisk
Hjälpsam
Målmedveten
Ordningsam

Vår rekryteringsprocess
Denna rekryteringsprocess hanteras av Academic Work och vår kunds önskemål är att alla frågor rörande tjänsten skickas till Academic Work.
Vi tillämpar löpande urval och kommer plocka ner annonsen när tillräckligt många kandidater har nått slutskedet i rekryteringsprocessen. Vid ansökan efterfrågas ett CV. Personligt brev använder vi inte som urvalsmetod och behöver därför inte bifogas. Rekryteringsprocessen innehåller två urvalstest: ett personlighetstest och ett test i kognitiv förmåga. Testerna är ett verktyg för att kunna hitta den kandidat med högst potential för tjänsten samt främja jämlikhet, mångfald och en rättvis rekryteringsprocess.

Nexer Engineering Process
Do you want to work hands-on with testing of Advanced Driver Assistance Systems (ADAS) and contribute to the development of safe and intelligent vehicle functions?
Nexer Engineering Process is looking for experienced ADAS Test Engineers for assignments with leading automotive customers in Sweden.
In this role, you will work close to vehicle development with a clear focus on verification and validation of ADAS functions at vehicle and system level.
Your role
You will be responsible for testing and validation of ADAS functions in real vehicles and controlled test environments.
Plan, execute, and evaluate tests for ADAS functions based on requirements and test strategies
Verify functional performance, robustness, and system behavior across relevant driving scenarios and conditions
Perform on-road, proving ground, and field testing
Collect, analyze, and evaluate test data; report results and deviations
Support testing in accordance with EHS regulations and applicable safety standards (ISO 26262, SOTIF where relevant)

Your profile
Valid Swedish B driving license
5+ years of experience in automotive testing, preferably within ADAS
Hands-on experience with vehicle-based, proving ground, and/or field testing
Good understanding of ADAS architectures and sensors (camera, radar, lidar)
Experience with automotive communication protocols (CAN, LIN, FlexRay, Ethernet)
Familiarity with test and analysis tools such as CANoe, CANalyzer, Matlab, Python, or similar
Bachelor’s or Master’s degree in Engineering or equivalent experience
Fluent in English, spoken and written

Meritorious experience
Field or expedition testing
Proven experience working with automotive clients in Sweden
Safety-related testing (ISO 26262 / SOTIF)
Swedish language skills

Why Nexer Engineering Process?
At Nexer, you are more than a consultant - you are part of a knowledgeable and supportive engineering organization. We believe in long-term development, collaboration, and continuous improvement.
We offer:
Challenging assignments within advanced ADAS and automated driving development
Long-term career development through mentoring, competence sharing, and training
A collaborative culture with strong technical support from colleagues
Flexibility and a healthy work-life balance
The opportunity to represent Nexer at leading automotive OEMs and suppliers

Our promise – Promising Future
We believe that innovative technology starts with skilled and motivated people.
At Nexer, we strive to make a real difference - for our clients, the automotive industry, and our engineers. We value diversity, encourage innovation, and believe in strong teamwork.
Ready to take the next step in ADAS testing?
Do you recognize yourself in this role and meet some or several of the requirements?
Apply today and join Nexer Engineering Process to help drive the future of intelligent and safe mobility.

Are you passionate about engine technology and ready to drive the development of next-generation automotive powertrains? Nexer Engineering Process is currently looking for Engine Test Engineers to join our team, representing us at client sites within the automotive industry.
As part of our team, you’ll get the opportunity to work on cutting-edge projects in the heavy-duty engine sector. We value engineers who are not just experts in engine testing and validation but also thrive on innovation and problem-solving to make an impact on the future of automotive engineering.
What you will work with
As a consultant with Nexer Engineering Process, you'll work with an experienced team, supporting our automotive clients in engine-related roles. You’ll help develop and validate engines, powertrains, emissions systems, and testing protocols in the automotive industry, with tasks such as:
Engine Testing & Validation: Conduct and manage engine performance tests, including emission control, fuel consumption, efficiency, and thermal management testing
Test Rig Management & Development: Build, configure, and maintain test rigs with specialized equipment (e.g., gas measurement, Urea injection, HC injection, pressure/temperature sensors)
Test Planning & Execution: Develop, program, and execute test sequences for engines, including the testing of catalytic performance, HV components, and transmission systems
Fault Tracing & Data Evaluation: Evaluate and quality control test data, trace faults in engines, test equipment, and emissions systems, ensuring accurate results and system performance
Collaboration with Development Teams: Work closely with engineering teams (mechanical, electrical, controls) to ensure optimal test conditions, validation, and test system integrity
Safety & Compliance: Ensure adherence to EHS standards, LEAN methods, and process safety for all testing and rig maintenance



Your exact responsibilities will vary depending on the client’s needs, but they will always involve technical leadership and support in engine development, testing, and validation.
Who we are looking for
We are looking for engineers with a strong mechanical or mechatronics background who are familiar with test environments, data handling, and validation processes. You are problem-solving and passionate about pushing the boundaries of automotive engine technologies.
Your background likely includes:
Experience with engine testing, emissions testing, or powertrain development
Hands-on experience in building and managing test rigs, programming test sequences, and calibrating equipment
Proficient with test equipment from AVL, Horiba, or similar manufacturers
Solid understanding of test protocols, measurement systems, and fault tracing techniques
Knowledge of automotive engine systems (e.g., fuel, emissions, combustion, exhaust aftertreatment systems)
Familiarity with software such as ATI Vision, MATLAB, Simulink, CATIA V5, or similar
Bachelor’s or Master’s degree in Mechanical Engineering, Mechatronics, Automotive Engineering, or a related field
Fluency in English, both written and spoken, with Swedish as a bonus



Why Nexer Engineering Process?
At Nexer, you’re not just a consultant — you’re part of a team that values knowledge sharing, support, and continuous improvement. We offer:
Challenging projects in cutting-edge automotive powertrain development
Opportunities for career growth through continuous learning and mentoring
A collaborative and supportive work culture that encourages innovation and creativity
Flexibility in your work environment with a strong work-life balance
The opportunity to represent Nexer at top automotive companies, contributing directly to impactful projects



Our promise - Promising Future
We believe that great technology begins with great people. At Nexer, we strive to make a positive difference — both in the automotive industry and for the engineers who work with us. We value diversity, encourage bold ideas, and believe in a strong team spirit.
Ready to accelerate your career in engine testing and development?
Do you feel like one or several of the mentioned skills apply to you? Apply today to be a part of Nexer Engineering Process and help drive the future of automotive powertrains. We would love to hear from you!